polypropylene block copolymer
Monolithic single-layer ROSTR® polypropylene sheet extruded from polypropylene block copolymer PP-B, is one of the basic construction materials with excellent performance characteristics and a wide range of applications.
ROSTR® PP-B sheets are characterized by exceptional impact resistance and the ability to maintain their performance at temperatures down to -20 °C (unlike ROSTR® PP-H sheets), as well as high rigidity, high strength, high chemical and corrosion resistance.
ROSTR® PP-B sheets are perfectly welded, forming a reliable, harmonic and durable joint. The strength of welded joints of ROSTR® PP-B sheets has been confirmed by NAKS experts.
DIN EN ISO 15013 Plastics — Extruded Sheets of Polypropylene (PP)
Technical conditions (TU) 22.21.30-012-23151701-2019
Product range
- Operating temperature range from -20 °С up to +80 °С.
- Ability to maintain its performance characteristics at low temperatures down to -20 °C (unlike ROSTR® PP-H sheets, which become breakable at temperatures below 0 °C).
- High tensile strength.
- High flexural strength.
- Superior impact strength even at low temperatures.
- High stiffness compared to the more elastic PE-HD.
- Elastic at low temperatures compared to PP-H.
- Lower susceptibility to stress cracking compared to PP-H.
- Abrasion resistance. (sand, waves).
- High wear resistance.
- High water impermeability.
- Vapour impermeability.
- UV-resistance (using a special UV additive).
- Not susceptible to biological corrosion.
- Does not react to microorganisms.
- Non-toxic.
- Does not produce harmful fumes.
- Does not affect the organoleptic properties of water or food.
- Does not have negative effect on health, ability to work or life expectancy.
- Environmentally friendly in production, transport, installation and operation.
- High chemical resistance: resistant to most acids, alkalis and solvents. At high temperatures - to alkalis, acids, salt solutions, vegetable and mineral oils; at room temperature - to organic solvents.
- High chemical and corrosion resistance.
- Resistance to oxidation, Oxidation is also called degradation or aging. Usually the thermomechanical (during processing) and thermooxidative (product operation) destruction of the polymer material are considered separately.
- Good chemical resistance when in contact with detergents, cleaning agents and disinfectants.
- Excellent resistance to aggressive seawater environment.
- Absolute safety even in aggressive chemical environments, at high thermal, static and dynamic loads, under intense UV radiation. (using a special UV additive).
- Electrical conductivity: good electrical insulation properties.
- Does not conduct electrical current. It acquires its electrically conductive capacity by adding special additives.
- Flammability class - G4 according to GOST 30244.
- Fire-resistance increases with the addition of antipyrene.
- Smoke-forming ability - D3 according to GOST 12.1.044.
- Ignitability class - B2 according to GOST 30402.
- Toxicity class - T4 according to GOST 12.1.044.
- Milling
- Welding
- Drilling
- Sawing
- Turning
- Connecting bolts, rivets
- Water jet cutting
- Cold curving
- Die cutting
- Thermoforming
| Material | PP-H | PP-B | PE-HD |
| Density, g/cm3 | 0,91 | 0,90-0,92 | 0,95-0,96 |
| Tensile yield point, MPa | ≥ 30 | ≥ 25 | ≥ 20 |
| Elongation at yield point, % | ≥ 9 | ≥ 12 | ≥ 8 |
| Tensile modulus of elasticity, MPa | ≥ 1200 | ≥ 1000 | ≥ 900 |
|
Charpy impact strength **, kJ/m2 |
≥ 6 | ≥ 15 | ≥ 10 |
| Melt flow rate 230 °C/2, 16 kg, g/10 min |
0,2-0,7 |
0,2-0,7 |
0,1-2 |
| Operating temperature, °C | От 0 до +100 | От -20 до +80 | От -50 до +80 |
| Compliance with the requirements of Rospotrebnadzor for polymeric materials in contact with food and drinking water | да | да | да |
- It is allowed to be used for the production of products intended for contact with food and drinking water (expert opinion of Rospotrebnadzor No. 2765).
- High quality of welded joints of sheets ROSTR® PP-B meets the requirements of GOST P 55142-20212 "Testing of welded joints of thermoplastics plates and tubes'' and DVS 2203-5 Testing of welded joints of thermoplastics plates and tubes - Technological bend test. Certificate of Conformity No. ROSS RU.НВ65.Н02348 / 21. The tests were carried out by experts from NAKS (link).
- ROSTR® PP-B sheets are produced according to the European standard DIN EN ISO 15013 "Plastics - Extruded Sheets Of Polypropylene (PP)" and TU 22.21.30-012-23151701-2019.
- The quality of ROSTR® PP-B sheets is confirmed by the certificate of conformity No. ROSS RU.НА39.Н00862 in the GOST R. system.
1. Water treatment and water purification
- Production of water treatment and water purification plants, seawater desalination plants, sewage pumping stations, wastewater treatment plants, grease traps, wells, septic tanks, VOCs, etc.
2. Tank building
- Production of drinking water reservoirs.
- Manufacturing and lining of tanks and containers for the food industry, pharmaceuticals, medicine, bioindustry, animal farming and agriculture, aquaculture / fish farming.
- Manufacturing / lining of chemically resistant tanks and apparatus for the chemical industry.
3. Chemical industry
- Manufacturing and lining of storage tanks and containers for different chemicals.
- Galvanic plants, steel-pickling plants, steel and stainless steel staining plants.
- Сorrosion-resilient exhaust air purification plants and ventilation systems.
- Manufacturing of apparatus for the chemical industry, plating barrel, filtration equipment, reservoirs, industrial baths, electroplating chamber, etc.
4. Mechanical engineering
- Parts and units of machines, as well as technological equipment for various purposes.
- Electrical insulating parts, panels, shields, instrument cases.
- Production of cases for electrical equipment.
5. Aircraft industry
6. Extraction of minerals
7. Shipbuilding
- Boats, motor boats.
8. Food industry
- Safe and high-grade clean rooms for Germ-free food production.
- Wall cladding for glaciers.
- Storage / processing tanks and containers for different substances, liquid, oil products and water.
- Barrels for kvass, beer, etc.
- Insulated containers.
- Safe and efficient meat, fish and poultry processing (Slaughterhouses, сutting boards, tanks for processing).
- Catering industry (tabletops, cutting boats, etc.).
9. Aquafarming
- RAS for fish and marine / freshwater animal breeding (crayfish, crabs, catfish, sturgeon, shrimps, etc.).
- Tanks for fish and water transporting.
- Fish farming tanks for salt water and freshwater fish.
- Offshore aquaculture.
- Mussel farming.
10. Agriculture and animal farming
- Drinking bowls for animals, containers for feeding.
- Storage tanks.
- Production of equipment for aquaculture / fish farming.
11.Pharmaceuticals, medicine, bioindustry
- Laboratory and medical furniture
- Safe and high-grade clean rooms for Medical research, Pharmacy, Germ-free food production.
- Bioreactors.
- Laboratory equipment, containers for medicines and insulated containers.
12. Construction of swimming pools, reservoirs and storage tanks.
13. Thermoforming industry
14. Sports and leisure
15. Civil engineering
16. Manufacture of household supplies.
Quality of ROSTR® PP-B sheets
- The quality of ROSTR® PP-B sheets complies with the European standard DIN EN ISO 15013 Plastics - Extruded Sheets Of Polypropylene (PP).
- The quality of ROSTR® PP-B sheets is confirmed by the certificate of conformity No. ROSS RU.НА39.Н00862 in the GOST R system.
- ROSTR® polypropylene sheets are allowed to be used for products intended for contact with food, drinking water and in drinking water supply systems, as evidenced by the expert opinion of Rospotrebnadzor No. 2765.
- High quality of welded joints of ROSTR® PP-B sheets meets the requirements of GOST P 55142-20212 "Testing of welded joints of thermoplastics plates and tubes'' and DVS 2203-5 Testing of welded joints of thermoplastics plates and tubes - Technological bend test. Certificate of Conformity No. ROSS RU.НВ65.Н02348 / 21. The tests were carried out by NAKS experts.
| Material | PP-H | PP-B | PE-HD |
| Density, g/cm3 | 0,91 | 0,90-0,92 | 0,95-0,96 |
| Tensile yield point, MPa | ≥ 30 | ≥ 25 | ≥ 20 |
| Elongation at yield point, % | ≥ 9 | ≥ 12 | ≥ 8 |
| Tensile modulus of elasticity, MPa | ≥ 1200 | ≥ 1000 | ≥ 900 |
|
Charpy impact strength **, kJ/m2 |
≥ 6 | ≥ 15 | ≥ 10 |
| Melt flow rate 230 °C/2, 16 kg, g/10 min |
0,2-0,7 |
0,2-0,7 |
0,1-2 |
| Operating temperature, °C | От 0 до +100 | От -20 до +80 | От -50 до +80 |
| Compliance with the requirements of Rospotrebnadzor for polymeric materials in contact with food and drinking water | да | да | да |