polypropylene homopolymer

Monolithic single-layer ROSTR® polypropylene sheet extruded from polypropylene homopolymer PP-H, is one of the basic construction materials with excellent performance characteristics and a wide range of applications.

ROSTR® PP-H sheet is a strong, rigid and corrosion-resistant material with high chemical resistance at extremely high temperatures up to 100 ° C.

But at low temperatures, ROSTR® PP-H sheets become breakable and prone to crack spreading (in contrast to ROSTR® PP-B sheets, which retain their performance properties at low temperatures).

DIN EN ISO 15013 Plastics — Extruded Sheets of Polypropylene (PP)

Technical conditions (TU) 22.21.30-012-23151701-2019

100% virgin raw materials

Approved for contact with drinking water and food

High quality dyes and UV protection

Consistent sheet geometry

Do you want to check the quality of our sheet? Order samples!

Request tank calculation according to DVS 2205 Download questionnaire

Product range

ROSTR® PP-H Sheets

grey

1500 х 3000

stock item order from 5 tons

Colour

Item

Price

Sheet format, mm

Thickness, mm

Protective film

Pieces per pallet

Weight, kg

ROSTR® PP-H 03 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

12.42

ROSTR® PP-H 04 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

16.56

ROSTR® PP-H 05 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

20.7

ROSTR® PP-H 06 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

24.84

ROSTR® PP-H 08 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

33.12

ROSTR® PP-H 10 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

41.4

ROSTR® PP-H 12 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

49.68

ROSTR® PP-H 15 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

62.1

ROSTR® PP-H 20 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

82.8

ROSTR® PP-H 25 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

103.5

ROSTR® PP-H 30 х 1500 х 3000 grey

По запросу

1500 х 3000

one side

124.2

Special properties

Thermal properties

Operating temperature range from 0 °С up to +100 °С.
Ability to maintain its operational properties (strength, chemical resistance, corrosion resistance) under the influence of various environments at constantly high temperatures and repeated heating.
Very high heat resistance and Permanent-heat stability.
High rigidity in upper temperature range.

Mechanical properties

High stiffness in upper temperature range.
But at low temperatures it is very breakable and prone to cracking, compared with the elastic at low temperatures polypropylene block copolymer PP-B.
High tensile strength.
Superior impact resistance.
High rigidity.
High flexural strength.
Abrasion resistance (sand, waves).
High wear resistance.
High water impermeability.
Vapor impermeability.

Biological neutrality

Not susceptible to biological corrosion.
Does not react to microorganisms.
Non-toxic.
Does not produce harmful fumes.
Does not affect the organoleptic properties of water or food.
Does not have negative effect on health, ability to work or life expectancy.
Environmentally friendly in production, transport, installation and operation.

Chemical properties

High chemical resistance: resistant to most acids, alkalis and solvents. At high temperatures - to alkalis, acids, salt solutions, vegetable and mineral oils; at room temperature - to organic solvents, more sensitive to hydrolysis in hot water than polypropylene block copolymer.
High chemical and corrosion resistance.
Resistance to oxidation, but lower oxidation resistance compared to polypropylene block copolymer. Oxidation is also called degradation or aging. Usually, the thermomechanical (during processing) and thermooxidative (product operation) destruction of the polymer material are considered separately.
Good chemical resistance when in contact with detergents, cleaning agents and disinfectants.
Excellent resistance to aggressive seawater environment.
Absolute safety even in aggressive chemical environments, at high thermal, static and dynamic loads, under intense UV radiation (using a special UV additive).
Resistant to hydrolysis and superheated steam.

Electrical insulating properties

Electrical conductivity: good electrical insulation properties.
Does not conduct electrical current. It acquires its electrically conductive capacity by adding special additives.

Fire safety

Flammability class - G4 according to GOST 30244.
Fire-resistance increases with the addition of antipyrene.
Smoke-forming ability - D3 according to GOST 12.1.044.
Ignitability class - B2 according to GOST 30402.
Toxicity class - T4 according to GOST 12.1.044.

Processing methods

Milling
Welding
Drilling
Sawing
Turning
Connecting bolts, rivets
Water jet cutting
Cold curving
Die cutting
Thermoforming
Cold forming
Laser cutting

Material specifications

Material	PP-H	PP-B	PE-HD
Density, g/cm³	0,91	0,90-0,92	0,95-0,96
Tensile yield point, MPa	≥ 30	≥ 25	≥ 20
Elongation at yield point, %	≥ 9	≥ 12	≥ 8
Tensile modulus of elasticity, MPa	≥ 1200	≥ 1000	≥ 900
Charpy impact strength**, kJ/m²	≥ 6	≥ 15	≥ 10
Melt flow rate 230°C/2, 16kg, g/10 min	0,2-0,7	0,2-0,7	0,1-2
Operating temperature, °C	От 0 до +100	От -20 до +80	От -50 до +80
Compliance with the requirements of Rospotrebnadzor for polymeric materials in contact with food and drinking water	yes	yes	yes

Approvals / Certifications

It is allowed to be used for the production of products intended for contact with food and drinking water (expert opinion of Rospotrebnadzor No. 2765).
High quality of welded joints of ROSTR® PP-H sheets meets the requirements of GOST P 55142-20212 "Testing of welded joints of thermoplastics plates and tubes'' and DVS 2203-5 Testing of welded joints of thermoplastics plates and tubes - Technological bend test. Certificate of Conformity No. ROSS RU.НВ65.Н02348 / 21. The tests were carried out by experts from NAKS (link).
ROSTR® PP-H sheets are produced according to the European standard DIN EN ISO 15013 "Plastics - Extruded Sheets Of Polypropylene (PP)" and TU 22.21.30-012-23151701-2019.
The quality of ROSTR® PP-H sheets is confirmed by the certificate of conformity No. ROSS RU.НА39.Н00862 in the GOST R system.

Documents

Product Catalog ROSTR® ENG (pdf)

About the Quality of ROSTR® Sheets

Video about Reliable Welded Joint

Application areas

1. Chemical industry

Manufacturing and lining of storage tanks and containers for different chemicals.
Galvanic lines, steel-pickling lines, steel and stainless steel staining plants.
Сorrosion-resilient exhaust air purification plants and ventilation systems.
Manufacturing of apparatus for the chemical industry, plating barrel, filtration equipment, reservoirs, industrial baths, electroplating chamber, etc.

2. Power engineering

3. Cladding and electrical insulating material

4. Tanks building

Production of drinking water reservoirs.
Manufacturing / lining of tanks and containers for the food industry, pharmaceuticals, medicine, bioindustry, animal farming and agriculture, aquaculture / fish farming.
Manufacturing / lining of chemically resistant tanks and apparatus for the chemical industry.

Quality of ROSTR® PP-H sheets

The quality of ROSTR® PP-H sheets complies with the European standard DIN EN ISO 15013 Plastics - Extruded Sheets Of Polypropylene (PP).
The quality of ROSTR® PP-H sheets is confirmed by the certificate of conformity No. ROSS RU.НА39.Н00862 in the GOST R system.
ROSTR® PP-H polypropylene sheets are allowed to be used for products intended for contact with food, drinking water and in drinking water supply systems, as evidenced by the expert opinion of Rospotrebnadzor No. 2765.
High quality of welded joints of ROSTR® PP-H sheets meets the requirements of GOST P 55142-20212 "Testing of welded joints of thermoplastics plates and tubes'' and DVS 2203-5 Testing of welded joints of thermoplastics plates and tubes - Technological bend test. Certificate of Conformity No. ROSS RU.НВ65.Н02348 / 21.